2019 Land Pride RCF3096 3-Point Mount

Call for Price

Land Pride
RCF3096 3-Point Mount



Performance in a Medium-Duty Cutter. The RCF30 Series is the perfect medium-duty cutter for pastures and roadside applications. Available in 3-Point, semi-mount or pull-type, the RCF30 features a 2-1/2" cutting capacity and 1/4" side skirts. Plus, every RCF30 comes with the rugged dependability that Land Pride Rotary Cutters are known for.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
  • 540 or 1000 rpm: Fits wider variety of tractors.
  • High gearbox hp rating: Gearboxes are built rugged. See Specifications for actual Gearbox hp ratings.
  • 5 Yr. limited gearbox warranty: Shows our confidence in the gearbox integrity
  • 3 Gearboxes: Allows equal torque to be spread to left and right gearbox.
  • Splined rubber flex-couplers between the center and outboard gearboxes: Protects the driveline and gearboxes from hard objects in the blade path.
  • Pull-Type constant velocity driveline Option: Constant velocity driveline reduces chatter and extends life of U-joint during turns.
  • Slip-clutch protection on main driveline: Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
  • 8'- Cat. 1 & 2 or 10'- Cat. 2 & 3 3-point & semi-mount hitches or pull-type hitch: Fits a wide range of tractors. Semi-Mount and Pull-Type fit older tractors without a top link and smaller tractors without enough lift capacity
  • 10 Gauge deck, fully welded: Fully welded deck adds rigidity.
  • 1/4" Thick sidewalls: Protects sidewalls from thrown objects
  • Round back design: Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out.
  • Pull-Type w/dual leveling rods: Dual leveling rods eliminate deck twisting when going over uneven terrain
  • Chain or rubber guard option: Reduces flying debris.
  • Full length skids with replaceable shoes: Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece.
  • Splined blade hub: Splined blade hub offers tight non-slipping attachment to output shaft.
  • 3/16" Round stump jumper: Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft
  • 1" x 4" Blade bar: Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
  • 1/2" x 4" Heat-treated blades: Heat-treated blades last longer than non-heat-treated blades.
  • 2 1/2" Diameter cutting capacity: Aids in cutting brush.
  • High blade tip speed: Means cleaner cutting. See Specifications for actual blade tip speeds
  • Laminated tires: Laminated tires can handle almost any condition and don’t go flat.
  • Quick Hitch adaptable: 3-Point and semi-mount are Quick Hitch adaptable.
  • Model: RCF3096 3-Point Mount
  • Machine weight with front & rear rubber guards. Includes hydraulic cylinder & 21" wheels with semi-mount and pull type units: w/ 15" wheels = 1,587 lbs
  • Hitch: Category 1 & 2 Quick Hitch Adaptable
  • Park jack: Parking jack attaches to the tongue of the pull type cutter
  • Cutting width: 8' - 0"
  • Overall width: 8' - 7"
  • Overall length: 8' - 6"
  • Deck height: 11 1/4"
  • Cutting height: 2" - 12" (5.1 cm - 30.5 cm)
  • Cutting capacity: 2 1/2"
  • Tractor Hp rating: 40 - 110 hp
  • Gearbox horsepower rating: T-box - 160 hp, outboard 110 hp
  • Gearbox: 540 rpm or 1000 rpm driven gearbox. Cast iron housing, beveled gears
  • Gearbox input / output shaft size: Input shaft = 1 3/4" - 20 spline Output shaft = 2" dia
  • Gearbox lubrication: 80-90w EP gear lube
  • Gearbox oil capacity, end boxes: Comer = 6 pints
  • Gearbox oil capacity, T-box: Comer = 4.5 pints
  • Deck material thickness: 10 gauge (3.4 mm)
  • Deck side skirt thickness: 1/4" (6 mm)
  • Skids: Replaceable
  • Stump jumper: 2 ea. - 3/16" (5 mm) Round pan
  • Blades (4): 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated Free-swinging suction blades
  • Blade bolts: Keyed with harden flat washer and locknut
  • Blade tip speed: 16,360 fpm
  • Driveline: ASAE Cat 4
  • Driveline protection: 4 plate slip clutch Rubber flex coupler to wing boxes
  • Tailwheel options - 3-point without rear axle: 2 tires: 4" x 8" x 15 1/4" Caster laminated
  • Tailwheel options - 3-point with rear axle: 2 tires: 4" x 8" x 15 1/4" Caster laminated or 6" x 9" x 21" caster laminated
  • Wheel bearings: Tapered roller bearing in cast iron hub
  • Shock absorption: Spring shock absorber on axle of semi-mount & pull type
  • Front guard: Optional: Rubber deflector, single chain guard, or double chain guard
  • Rear guard: Optional: Rubber deflector, single chain guard, or double chain guard



Working Width
8 ft.
8 ft. 7 in.
8 ft. 6 in.
1,587 lb.
Recommended HP
50-110 hp

Related Products

New Equipment for Sale in Faulkner and Hollywood MD

Hugh C. Gardiner, Inc has two locations in Southern MD and is an authorized Kubota, Cub Cadet, Ferris, Land Pride, Woods and Stihl dealer.

We carry new equipment for all your farming and lawn care needs including tractors, lawn and zero turn mowers, chainsaws, trimmers and leaf blowers.

Please give us a call at 301-934-2841 for financing options.