2019 Land Pride RCD1884

Call for Price

Land Pride



Right for the Job.

The RCD1884 is a smooth-top, offset cutter thatperforms best in grass-only applications. Being dual spindle, the cutter is shorter in length than single spindle 84" cutters; the reduced length allows for better maneuverability in tight spaces. The 10" offset makes the RCD1884 a good solution for applications that require cutting close to buildings, fences, or other obstacles that might be found in orchards, parks, or rights-of-way. Deep-deck design, All-welded deck, Short coupled for tight spaces and Clevis-style hitches for easy hook-up.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
  • Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
  • Cat. 3 main driveline with 2-plate slip-clutch: 2-Plate slip-clutch protect driveline and gearboxes. slip-clutch is more convenient than shear bolt for continual work.
  • Shock absorbing flex-coupler between main and side gearboxes: Protects intermediate drive shaft and side gearbox from hard objects in the blade path.
  • 10" Deck offset to the right: Allows the operator to cut closer to bodies of water, drainage ditches, roadways and objects such as fence lines, guard rails, buildings, and trees.
  • Lower clevis type 3-Point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • Fully welded 10 gauge deck: Fully welded deck adds additional strength to the deck. 10 Gauge decks can withstand more abuse than decks with lighter gauge.
  • Box tubing deck supports: Makes for a stronger rigid deck.
  • Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
  • 11 5/8" Deck Height: Allows cutter to handle heavy cutting conditions.
  • 1 1/2" to 12" Cutting height: Provides for a wide range of cutting conditions.
  • Skid shoes: Provides sidewall reinforcement and protection to bottom of sidewall.
  • 1/2" x 4" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
  • 1/2" x 4" Blade bar: Heavy-duty blade bar adds support to stump jumper and gearbox output shaft.
  • Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • Stump jumper: Standard round stump jumper slides over stumps, rocks, and debris.
  • Front and rear guarding: Protect against flying debris. Optional front rubber or single chain guarding. Standard rear metal band or optional rear extended metal guarding.
  • Optional 15" Laminated tailwheel, or 4" x 16’ Molded rubber: Laminated material is long lasting in rough conditions and can’t go flat. Molded Rubber Can’t go flat.
  • Model Number: RCD1884
  • Machine Weight with Dual Laminated Tailwheels: 900 lbs.
  • Hitch: Category l with clevis type lower links and floating top linkage. Quick Hitch adaptable
  • Cutting Width: 84"
  • Overall Width: 86 9/16"
  • Overall Length: 80 9/16"
  • Offset Distance to the Right: 10"
  • Deck Height at Rear: 11 5/8"
  • Cutting Height: 2" - 12"
  • Cutting Capacity: 1 1/2" Diameter
  • Recommended Tractor Power Take-Off Horsepower: 35-60 horsepower
  • Power Take-Off: Speed 540 rpm
  • Gearbox: 60 Hp main gearbox & 45 horsepower side gearbox With speed-up beveled gears, cast iron housing, and 1.67" output shaft
  • Gearbox Lubricant: EP 80-90W oil
  • Gearbox oil Capacity: Main Gearbox:4.7 pints; Side Gearbox: 3.5 pints
  • Deck Construction: All welded deck
  • Deck Material Thickness: 10 Gauge
  • Side Skirt Material Thickness: 10 Gauge
  • Skid Shoe Construction: 3/16" Weld-on with mounting holes for adding optional bolt-on replaceable shoes
  • Stump Jumper: 10 Gauge x 24" Round dish pan with 1" x 4" x 19 1/2" blade bar
  • Blades (4): 1/2" x 4" x 16" Heat treated alloy steel free-swinging suction blades
  • Blade Overlap: 5"
  • Blade Bolts: Keyed with harden flat washers & locknuts.
  • Blade Tip Speed: 11,693 fpm
  • Main Driveline: ASAE Category 3
  • Main Driveline Protection: 2 plate slip clutch
  • Tailwheel Mount: Caster fork with 360 degree swivel
  • Tailwheel: Optional two 15" laminated tire or two 4" x 16" molded rubber tire.
  • Front Guard: Optional 4" x 6" molded rubber or single chain guard
  • Rear Guard: Standard metal band or optional metal extended guard
  • Machine Weight with Dual Solid Tailwheels: 905 lbs.



Working Width
84 in.
86 9/16 in.
80 9/16 in.
Dual Laminated Tailwheels: 900 lb.; Dual Solid Tailwheels: 905 lb.
Recommended HP
35-60 hp

Related Products

New Equipment for Sale in Faulkner and Hollywood MD

Hugh C. Gardiner, Inc has two locations in Southern MD and is an authorized Kubota, Cub Cadet, Ferris, Land Pride, Woods and Stihl dealer.

We carry new equipment for all your farming and lawn care needs including tractors, lawn and zero turn mowers, chainsaws, trimmers and leaf blowers.

Please give us a call at 301-934-2841 for financing options.